Add More 
W1737 37" Wide-Belt Sander 1PH
37" Wide-Belt Sander 1PH
Item Number W1737
Description :
Door builders and cabinet shops will love the extra width these 37" wide-belt sanders provide over 24" models. Available with 15 HP, 3-phase or 10 HP, single-phase sanding motors, these wide-belts are built for daily industrial use with features like a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005", meaning you'll spend more time sanding than cranking handwheels and taking measurements. Also, the variable speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to "tweakÓ the sander for soft, smooth finishes on all types of wood.
Specifications :
MODEL |
W1737 |
| Sanding motor | 10 HP, 220V, single-phase, 50 Amp, 1725 RPM, 60 Hz cycle, triple V-belt drive |
| Conveyor motor | 1 HP, 220V, single-phase, 7 Amp, 60 Hz cycle, variable speed belt/gearbox |
| Table elevation motor | 1/3 HP, 220V, single-phase, 3.6 Amp, 1725 RPM, 60 Hz cycle, V-belt power transfer |
| Maximum board width | 36-1/2" |
| Maximum board thickness | 6" |
| Minimum board length | 14" |
| Air requirements | 70 PSI |
| Surface speed of drums | 2,565 FPM |
| Conveyor feed rate | Variable, 15-49 FPM |
| Built in air filter/regulator | |
| Independent motor control | |
| Pneumatic belt tracking and tensioning | |
| Amp meter for load measurement | |
| Safety shut-off bar | |
| Digital readout and control panel | |
| (3) 4" dust ports | |
| Steel cabinet | |
| Rubber infeed drum | |
| Steel outfeed drum | |
| Rubber pressure drums | |
| Micro-adjustable graphite/felt platen | |
| Overall dimensions | 69-5/8"H x 52-1/8"W x 49-3/8"D |
| Approximate shipping weight | 2310 lbs. |