Laguna 18|Bx Bandsaw

Laguna 18|Bx Bandsaw

Laguna P12|10 Panelsaw

Laguna P12|10 Panelsaw

Laguna P12|8 Panelsaw

Laguna P12|8 Panelsaw 

$0.00
Availability: In stock
SKU
P12|8

The all new P12 panelsaws are here, available with four sizes of sliding tables: 4′, 5′, 8′, and 10′. P12|8 Features 102″ dumbbell sliding table design with longer body, 5 HP main motor, 3/4 HP scoring and swing-away guard.

Details:

  • The P12|8 was designed to clear 8-ft. material using a 12″ blade. This means that when you finish your stroke, the back end of your sheet will just have cleared the blade, causing no friction as the blade is spinning down.
  • The 102″ sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.
  • The European style 51″ rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.
  • The overhead guard comes standard with quick-change 90° and 45° guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5″).
  • The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108″), 45° miter and is ergonomically designed to make it easier to read the tape.
  • Inside the P12|8 you will find heavy castings, solid gears and precision-machined trunnions mounted onto the solid steel frame.
  • The heavy-duty motor is equipped with soft start to minimize initial amperage draw.
  • The P12/8 comes standard with hold-down clamp, rip shoe, and push handle
 
Specifications:
  • Motor: 5HP Main
  • Motor: 3/4 HP Scoring
  • Volt: 220, 1 phase, 60 Hz.
  • Blade Capacity: 12″, 14″/300mm, 355mm
  • Max. Blade: 16″/400mm (minimum height when lowered: 1″/25mm)
  • Max Scoring Blade: 4 3/4″/120mm
  • Scoring Adjustment: T-Handle through Cast Top
  • Arbor: 30mm Main, 20mm Scoring
  • Max Cutting Height 90° 14″/355mm Blade: 4 1/2″/115mm
  • Max Cutting Height 90° 16″/400mm Blade:5 1/8″/130mm
  • Max Cutting Height 45° 14″/355mm Blade: 2 3/4″/70mm
  • Max Cutting Height 45° 16″/400mm Blade: 3 1/2″/90mm
  • Main Blade Speed: 4000 RPM
  • Scoring Blade Speed: 8000 RPM
  • Dust Collection Port Saw: 4.75″/120mm
  • Dust Collection Port Guard: 4″/ 100mm
  • Sliding Table: 102.36″/2600mm
  • Sliding Table Width: 14.88″/378mm
  • Main Cast Table: 21 1/2″ x 35 1/4″
  • Rip Fence: 51″/1300mm
  • Rip Fence Micro Adjust: Included
  • Rip Fence Bar: 1 5/8″/40mm  Solid Steel Micro Polished
  • Overhead Guard with Swing-Away
  • Push Handle: Included
  • Rip Shoe: Included
  • Hold Down Clamp: Included
  • 32″ x 12″ Steel Extension Table: Included
  • Crosscut Fence 2 x Flip-Stops
  • Crosscut Fence Readout: Inch/Metric
  • Crosscut Fence Max. Collapsed: 77″
  • Crosscut Fence Max. Extended: 140″
  • Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
  • Ship Dimensions Body: 83″ x 47″ x 46″
  • Ship Dimensions Table: 137″ x 20″ x 15″
  • Weight (Net/Ship): 1815/2112 lbs