Laguna P12|8 Panelsaw

The all new P12 panelsaws are here, available with four sizes of sliding tables: 4′, 5′, 8′, and 10′. P12|8 Features 102″ dumbbell sliding table design with longer body, 5 HP main motor, 3/4 HP scoring and swing-away guard.

Details:

• The P12|8 was designed to clear 8-ft. material using a 12″ blade. This means that when you finish your stroke, the back end of your sheet will just have cleared the blade, causing no friction as the blade is spinning down.
• The 102″ sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.
• The European style 51″ rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.
• The overhead guard comes standard with quick-change 90° and 45° guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5″).
• The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108″), 45° miter and is ergonomically designed to make it easier to read the tape.
• Inside the P12|8 you will find heavy castings, solid gears and precision-machined trunnions mounted onto the solid steel frame.
• The heavy-duty motor is equipped with soft start to minimize initial amperage draw.
• The P12/8 comes standard with hold-down clamp, rip shoe, and push handle

• Motor: 5HP Main
• Motor: 3/4 HP Scoring
• Volt: 220, 1 phase, 60 Hz.
• Blade Capacity: 12″, 14″/300mm, 355mm
• Max. Blade: 16″/400mm (minimum height when lowered: 1″/25mm)
• Max Scoring Blade: 4 3/4″/120mm
• Scoring Adjustment: T-Handle through Cast Top
• Arbor: 30mm Main, 20mm Scoring
• Max Cutting Height 90° 14″/355mm Blade: 4 1/2″/115mm
• Max Cutting Height 90° 16″/400mm Blade:5 1/8″/130mm
• Max Cutting Height 45° 14″/355mm Blade: 2 3/4″/70mm
• Max Cutting Height 45° 16″/400mm Blade: 3 1/2″/90mm
• Main Blade Speed: 4000 RPM
• Scoring Blade Speed: 8000 RPM
• Dust Collection Port Saw: 4.75″/120mm
• Dust Collection Port Guard: 4″/ 100mm
• Sliding Table: 102.36″/2600mm
• Sliding Table Width: 14.88″/378mm
• Main Cast Table: 21 1/2″ x 35 1/4″
• Rip Fence: 51″/1300mm
• Rip Fence Micro Adjust: Included
• Rip Fence Bar: 1 5/8″/40mm  Solid Steel Micro Polished
• Overhead Guard with Swing-Away
• Push Handle: Included
• Rip Shoe: Included
• Hold Down Clamp: Included
• 32″ x 12″ Steel Extension Table: Included
• Crosscut Fence 2 x Flip-Stops
• Crosscut Fence Readout: Inch/Metric
• Crosscut Fence Max. Collapsed: 77″
• Crosscut Fence Max. Extended: 140″
• Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
• Ship Dimensions Body: 83″ x 47″ x 46″
• Ship Dimensions Table: 137″ x 20″ x 15″
• Weight (Net/Ship): 1815/2112 lbs